Commit 6b5bacf6 authored by Daniel P. Berrange's avatar Daniel P. Berrange Committed by Stefan Hajnoczi

trace: split out trace events for hw/misc/ directory

Move all trace-events for files in the hw/misc/ directory to
their own file.
Signed-off-by: 's avatarDaniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-14-git-send-email-berrange@redhat.com
Signed-off-by: 's avatarStefan Hajnoczi <stefanha@redhat.com>
parent 92fe6aff
......@@ -130,3 +130,4 @@ trace-events-y += hw/intc/trace-events
trace-events-y += hw/net/trace-events
trace-events-y += hw/virtio/trace-events
trace-events-y += hw/audio/trace-events
trace-events-y += hw/misc/trace-events
# See docs/trace-events.txt for syntax documentation.
# hw/misc/eccmemctl.c
ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
# hw/misc/slavio_misc.c
slavio_misc_update_irq_raise(void) "Raise IRQ"
slavio_misc_update_irq_lower(void) "Lower IRQ"
slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
apc_mem_writeb(uint32_t val) "Write power management %02x"
apc_mem_readb(uint32_t ret) "Read power management %02x"
slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
# hw/misc/milkymist-hpdmc.c
milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
# hw/misc/milkymist-pfpu.c
milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
......@@ -46,26 +46,6 @@ virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon target: %
nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x"
nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x"
# hw/misc/eccmemctl.c
ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
# hw/nvram/fw_cfg.c
fw_cfg_select(void *s, uint16_t key, int ret) "%p key %d = %d"
fw_cfg_read(void *s, uint64_t ret) "%p = %"PRIx64
......@@ -96,27 +76,6 @@ ps2_mouse_reset(void *opaque) "%p"
ps2_kbd_init(void *s) "%p"
ps2_mouse_init(void *s) "%p"
# hw/misc/slavio_misc.c
slavio_misc_update_irq_raise(void) "Raise IRQ"
slavio_misc_update_irq_lower(void) "Lower IRQ"
slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
apc_mem_writeb(uint32_t val) "Write power management %02x"
apc_mem_readb(uint32_t ret) "Read power management %02x"
slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
# hw/timer/slavio_timer.c
slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x"
slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
......@@ -589,20 +548,10 @@ megasas_mmio_invalid_readl(unsigned long addr) "addr 0x%lx"
megasas_mmio_writel(const char *reg, uint32_t val) "reg %s: 0x%x"
megasas_mmio_invalid_writel(uint32_t addr, uint32_t val) "addr 0x%x: 0x%x"
# hw/misc/milkymist-hpdmc.c
milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
# hw/sd/milkymist-memcard.c
milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
# hw/misc/milkymist-pfpu.c
milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
# hw/input/milkymist-softusb.c
milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment